รายละเอียดสินค้า
Available Features:
- SFA 0.001mm per 90 Adjustment
- 2-Axis Centerline Adjustment
- Arm Retraction For Part Loading
- Extended Reach for Counterweight Clearance
- Fixed or Follow Down Operation
- Visible Zero Adjustment Screws
- Upper Arm Gage Clearance
- Position Feedback Sensors
- Side Mount Cylinder
- Clamp diameters available up to 220 millimeters
- Max Journal Size: 95 mm
- Lifting Capacity: 83 kg
- ± 0.20 mm X/Y Axis Adjustment Range
- Replaces Gen 4 Model GR-1150V-SDG
- Max Journal Size: 95 mm
- Lifting Capacity: 70 kg
- ± 0.20 mm X/Y Axis Adjustment Range
- Replaces Gen 4 Model GR-1350VSDG
- Max Journal Size: 130 mm
- Lifting Capacity: 125 kg
- ± 0.20 mm X/Y Axis Adjustment Range
- Replaces Gen 4 Model GC29403A
- Max Journal Size: 140 mm
- Lifting Capacity: 127 kg
- ± 0.20 mm X/Y Axis Adjustment Range
- Replaces Gen 4 Model GC30916A
- Max Journal size: 172 mm
- Lifting Capacity: 175 kg
- ± 0.20 mm X/Y Axis Adjustment
- Replaces Gen 4 Model GC18206A
- Max Journal size: 110 mm
- Lifting Capacity: 80 kg
- ± 0.20 mm X/Y Axis Adjustment
- Replaces Gen 4 Model GC25584M
- Clamping Range: 15-40mm
- Lifting Capacity: 43 kg
- ± 0.20 mm X/Y Axis Adjustment Range
- Replaces Gen 4 Model GR-3520V
- Clamping Range: 15-60mm
- Lifting Capacity: 43 kg
- ± 0.20 mm X/Y Axis Adjustment Range
- Replaces Gen 4 Model GR-6030V
- Clamping Range: 15-40mm
- Lifting Capacity: 43 kg
- ± 0.20 mm X/Y Axis Adjustment Range
- Replaces Gen 4 Model GR-3520V
- Clamping Range: 15-60mm
- Lifting Capacity: 43 kg
- ± 0.20 mm X/Y Axis Adjustment Range
- Replaces Gen 4 Model GR-115V
- Clamping Range: 10-90mm
- Lifting Capacity: 78 kg
- ± 0.20 mm X/Y Axis Adjustment Range
- Replaces Gen 4 Model GR-320V
- ±0.08mm Y-Axis Adjustment Range
- ±0.13mm Z-Axis Adjustment Range
- Max Pressure: 32 bar
- Mass: 4kg
- ±0.08mm Y-Axis Adjustment Range
- ±0.13mm Z-Axis Adjustment Range
- Max Pressure: 32 bar
- Mass: 4kg
- ±0.08mm Y-Axis Adjustment Range
- ±0.13mm Z-Axis Adjustment Range
- Max Pressure: 32 bar
- Mass: 4kg
- ±0.08mm Y-Axis Adjustment Range
- ±0.13mm Z-Axis Adjustment Range
- Max Pressure: 32 bar
- Mass: 4kg
- ±0.04mm Y-Axis Adjustment Range
- ±0.12mm Z-Axis Adjustment Range
- Max Pressure: 32 bar
- Mass: 2.5kg
- ±0.07mm Y-Axis Adjustment Range
- ±0.22mm Z-Axis Adjustment Range
- Max Pressure: 45 bar
- Mass: 5kg
Turning AUTO REST®:
Turning AUTO REST®’ three-roller contact and patented sliding wedge design assures prolonged operational accuracy and epeatability. This simplified design eliminates cams, bearings, gears, springs and pivot pins.
The roller/cam operating mechanism common to other steady rests is replaced by the sliding wedge. Machining forces are distributed over large hardened and ground surfaces instead of merely a line contact. As a result, wear is minimized, maintaining original accuracies and extending service life.
After initial set up Turning AUTO REST”‘ automatically and accurately positions each subsequent part. Adjustment and set up time for individual parts is virtually eliminated. Part quality and machine productivity are significantly improved. Higher operating speeds and and heavier cuts are possible resulting in reduced production cycle time.
There are a number of standard Turning AUTO REST”‘ models available to choose from. Each model has a large clamping range to handle a wide range of parts. If one of our standard models doesn’t offer the solution you need we offer many custom models or can have our full time engineering staff design a Turning AUTO REST®to fit your specific needs.
- Max Clamp Size: 65 mm
- Min Clamp Size: 6 mm
- Max Lifting Capacity: 38kg
- Mass: 8.6kg
- Max Clamp Size: 105 mm
- Min Clamp Size: 12 mm
- Max Lifting Capacity: 190kg
- Mass: 20.4kg
- Max Clamp Size: 170 mm
- Min Clamp Size: 20 mm
- Max Lifting Capacity: 250kg
- Mass: 60kg
- Max Clamp Size: 250 mm
- Min Clamp Size: 35 mm
- Max Lifting Capacity: 650kg
- Mass: 132kg
- Max Clamp Size: 330 mm
- Min Clamp Size: 60 mm
- Max Lifting Capacity: 650kg
- Mass: 214kg
- Max Clamp Size: 460 mm
- Min Clamp Size: 125 mm
- Max Lifting Capacity: 1,180kg
- Mass: 476kg
PARA-GRIP® & TRUE-GRIP®:
Arobotech Systems grippers and centering devices offer the most flexible and precise option available on the market. Designed and manufactured to the same exacting standards as our AUTO REST® products, the quality of our grippers and centering devices ensure long life and trouble free operation.
There are a number of standard models available to choose from. Each model has a large clamping range to handle a wide range of parts. If one of our standard models doesn’t meet your requirements we offer many custom models or can have our full time engineering staff design to to fit your specific needs.
