รายละเอียดสินค้า
DN-70 – Mini.
- Miniature indicator , Modbus Protocol Basic Installations
- Available sensor : Load cell, torque sensor etc.
- simple and quick using four push buttons only.
- High resolving power (24bit A/D)
- Quick sampling speed (100times/sec)
- Watch dog
- Small size(48*48*128mm) / Cutting size : 45.5*45.5mm
- Weight : about 280g
- Power Input 24V
- Option: OP-03: RS485 , OP-06 :Analog out(DAC)
SPECIFICATIONS
SpecificationsAccuracyApplication sensorSensor authorized voltage
(the number of Loadcell connection)Zero adjustment rangeInput signalAD converterDA converterDisplayDisplay speedCharacter heightDecimal pointSampling speedZero variationSensitivity variationVoltage output(OPTION)Usage temperature rangeHumidityPower source usedRelay output
| Strain guage sensor (350Ω or 700Ω) |
| DC 5V, Loadcell(350Ω) available 4 |
| 100% F·S (Auto Zero) |
| 1 ~ 3.0mV/V |
| 24bit |
| 16bit |
| -19999 ~ +99999 |
| Appox. 32times/sec |
| 7Segment 8mm |
| Random setting available |
| Max 100 times/sec |
| within 0.5μV/℃ |
| 50ppm/℃ |
| DC 0~±10V , 4~20mA (Selective use) |
| -10℃ ~ 60℃ |
| less than 80% RH (no dew condensation) |
| DC 24V 0.1A |
| Contact capacity : AC 250V 3A |
| Relay life time : more than 1,000,000 times |
DN10W
DIMEMSIONS
SPECIFICATIONS
| Specifications | Accuracy | |
|---|---|---|
| DN10W | ||
| Application sensor | Strain guage sensor (350Ω or 700Ω) | |
| Sensor authorized voltage (the number of Loadcell connection) |
DC 5V, Loadcell(350Ω) available 4 | |
| Zero adjustment range | 100% F·S (Auto Zero) | |
| Input signal | 0.5 ~ 3mV/V | |
| Display | -19999~99999 | |
| Display speed | Appox 30times/sec(Adjustment available by buff setting) | |
| Character height | 7Segment 5 digit LED 14mm | |
| Decimal point | Random setting available | |
| A/D converter | 16bit, Max. 100 times/sec | |
| D/A converter | 12bit | |
| Zero variation | within 0.5μV/℃ | |
| Sensitivity variation | within0.01%/℃ | |
| Voltage output | DC 0~±10V or 4~20mA (Selective use) | |
| Usage temperature range | -10℃ ~ 60℃ | |
| Humidity | less than 80% RH (no dew condensation) | |
| Power source used | AC 85 ~ 265V 50/60Hz | |
| Relay output | ㆍUpper and lower limit comparison output ㆍ4 relay output ㆍContact capacity : AC 250V 5A ㆍRelay life time : more than 5,000,000times |
|
| Network | RS-232C | |
| Option | ㆍBCD Paralle out (OP-01) ㆍRS485 (OP-02) ㆍDAC ANALOG OUT (OP-03) |
|
DN20W
SPECIFICATIONS
| Specifications | Accuracy |
|---|---|
| Application sensor | Pressure sensor, Linear Pontentiometer(LPS, CTP) |
| Sensor authorized voltage (the number of Loadcell connection) |
DC 10V, 24V (Dip switch) |
| Zero adjustment range | 100% F·S (Auto Zero) |
| Input signal | DC 0~5V, 0~10V, 4~20mA |
| Display | -19999~99999 |
| Display speed | Appox 30times/sec(Adjustment available by buff setting) |
| Character height | 7Segment 5 digit LED 14mm |
| Decimal point | Random setting available |
| A/D converter | 16bit, Max. 100 times/sec |
| D/A converter | 12bit |
| Zero variation | within 0.5μV/℃ |
| Sensitivity variation | within0.01%/℃ |
| Voltage output | DC 0~10V or 4~20mA |
| Usage temperature range | -10℃ ~ 60℃ |
| Humidity | less than 80% RH (no dew condensation) |
| Power source used | 220V 50/60Hz (110V available by internal operation) |
| Relay output | AC 250V 5A, Relay life time : more than 5,000,000 times |
| Network | RS-232C |
| Option | ㆍBCD Paralle out (OP-01) ㆍRS485 (OP-02) ㆍDAC ANALOG OUT (OP-03) |
Indicator
Dacell is providing ultra-precision load cells and various weighting and measuring products,
which can be used in various fields of industries, based on 20 years of experiences in manufacturing
of weighing and measuring products and with own superior technologies.
DN25W
The product shows signal of differential trane displace sensor (LVDT) into digital display and analogue output as indicator, and intermediate or high sampling (100 times/sec) and comparison output are available
Feature
Best for measuring transformer type displacement sensor (LVDT)
Rapid sampling speed (100 times/sec.)
High resolving power (16bit A/D)
High accuracy (over 0.02% F S) and stability
One touch Auto zero (Display & Analog out zero)
Calibration of measurement Standard
Watch dog
Peak & sample hold
Upper and lower limit comparison output
NG, OK decision function
4 Relay (HH, HI, LO, LL) out
Analog out (DAC)
Option
OP-02 : RS-232C serial interface OP-03 : RS485 Multi drop interfaceSPECIFICATION
| Specifications | Accuracy |
|---|---|
| Application sensor | linear variable differential transformer (LVDT) |
| Sensor authorized voltage | 2Vrms/5kHz |
| Zero adjustment range | 100%F·S (Auto Zero) |
| Display | -19999 ~ -99999 |
| Character height | 7 segment LED 10mm |
| Decimal point | Random setting available |
| A/D converter | 16bit, 100 times/sec |
| D/A converter | 12bit |
| Zero variation | within 0.5μV/℃ |
| Sensitivity variation | within 0.01%/℃ |
| Voltage output | DC 0~±10V or 4~20mA |
| Usage temperature range | -10℃~60℃ |
| Humidity | Less than 80% RH (no dew condensation) |
| Contact capacity | AC 250V 5A |
| Relay life time | more than 5,000,000 times |
| Power source used | 220V 50/60Hz (110V available by internal operation) |
| Option | OP-02 : RS232C, OP-03 : RS485 |
DN100
- Suitable for use of sensors measured using strain gauges.
- Functions such as digital display, analog output, relay output, etc.
- Suitable for use in places where high-speed measurement is required (pressure load management, impact test, etc.).
- High-speed responsiveness and high precision.
- The upper limit setting is displayed.
– Ultra-fast conversion A/D (7,000 sps)
– High resolution (24 bit ADC, 16 bit DAC)
– High precision (0.01% F.S. or higher) and stability
– Actual load and sensor output calibration
– Unit conversion function (kg, N, ℓb, kg/㎠, bar, MPa)
– Auto zero function (Digital display and analog output simultaneously Zero)
FUNCTION
– Peak & sample hold, Average hold
– Upper and lower limits comparison output
– Analog output (DAC)
– NG, OK, judging function
– 4 Relay Contact Output
– Modbus RTU protocol
OPTION
– OP-01 : BCD parallel out – OP-02 : RS232C serial interface – OP-03 : RS485 Multi drop interface
– OP-04 : RS422A serial interface – OP-10: Power DC24V 0.3A – OP-14: Signal input 5 mV/V
– OP-15: Signal input 10mV/V
Specifications
| Application sensor | Strain guage sensors |
| Sensor authorized voltage | DC 5V, Loadcell(350Ω) available 4 |
| Zero adjustment range | 100% F.S (Auto Zero) |
| Input signal | 0.5 ~ 3mV/V |
| Display | -19999 ~ +99999 |
| Character height | 7 segment LED 14mm & 10mm |
| A/D converter | 24 bit 7,000 sps |
| D/A converter | 16 bit 7kHz |
| Temperature characteristics | ±10ppm/℃ |
| Analog output | DC 0 ~ ±10V or 4 ~ 20mA (selective use) |
| Contact capacity | AC 250V/DC 30V 3A |
| Relay life time | more than 10,000,000 times |
| Usage temperature range | -10℃ ~ 60℃ |
| Humidity | Less than 80% RH (no dew condensation) |
| Power source used | AC 90 ~ 240V, 50/60Hz 12VA |
| Sizes | 98 × 98 × 141mm |
| Panel cutting size | 92.5 × 92.5mm |
| weight | Appr. 700 g |
제품치수 (unit:mm)
DN50W
Feature
OPTION
SPECIFICATIONS
| Specifications | Accuracy |
|---|---|
| Application sensor | Strain guage sensor (350Ω or 700Ω) |
| Sensor authorized voltage (the number of Loadcell connection) |
DC 5V, Loadcell(350Ω) available 4 |
| Zero adjustment range | 100% F·S (Auto Zero) |
| Input signal | 0.5 ~ 3.0mV/V |
| AD converter | 24bit 1000times/sec |
| DA converter | 16bit 1000 times/sec |
| Display | -19999 ~ +99999 |
| Display speed | Appox. 32times/sec |
| Character height | 7Segment 14mm |
| Decimal point | Random setting available |
| Sampling speed | Max 1000 times/sec |
| Zero variation | within 0.5μV/℃ |
| Sensitivity variation | 50ppm/℃ |
| Voltage output | DC 0~±10V or 4~20mA (Selective use) |
| Usage temperature range | -10℃ ~ 60℃ |
| Humidity | less than 80% RH (no dew condensation) |
| Power source used | AC 85 ~ 265V 50/60Hz |
| Relay output | Contact capacity : AC 250V 5A |
| Relay life time : over 107 times, 105 times at rated load |
DIMENSIONS
DN 200
- Suitable for use of sensors measured using strain gauges.
- Functions such as digital display, analog output, relay output, etc.
- Suitable for use in places where high-speed measurement is required (pressure load management, impact test, etc.).
- High-speed responsiveness and high precision.
- The upper limit setting is displayed.
FEATURE
– Ultra-fast conversion A/D (2,000 sps)
– High resolution (24 bit ADC, 16 bit DAC)
– High precision (0.01% F.S. or higher) and stability
– Actual load and sensor output calibration
– Unit conversion function (kg, N, ℓb, kg/㎠, bar, MPa)
– Auto zero function (Digital display and analog output simultaneously Zero)
FUNCTION
– Peak & sample hold, Average hold
– Upper and lower limits comparison output
– Analog output (DAC)
– NG, OK, judging function
– 4 Relay Contact Output
– Modbus RTU protocol
OPTION
– OP-01 : BCD parallel out – OP-02 : RS232C serial interface
– OP-03 : RS485 Multi drop interface – OP-04 : RS422A serial interface
– OP-10: Power DC24V 0.3A – OP-14: Signal input 5 mV/V
– OP-15: Signal input 10mV/V
Specifications.
| Application sensor | Strain guage sensors |
| Sensor authorized voltage | DC 5V, Loadcell(350Ω) available 4 |
| Zero adjustment range | 100% F.S (Auto Zero) |
| Input signal | 0.5 ~ 3mV/V |
| Display | -19999 ~ +99999 |
| Character height | 7 segment LED 14mm & 10mm |
| A/D converter | 24 bit 2,000 sps |
| D/A converter | 16 bit 2kHz |
| Temperature characteristics | ±10ppm/℃ |
| Analog output | DC 0 ~ ±10V or 4 ~ 20mA (selective use) |
| Contact capacity | AC 250V/DC 30V 3A |
| Relay life time | more than 10,000,000 times |
| Usage temperature range | -10℃ ~ 60℃ |
| Humidity | Less than 80% RH (no dew condensation) |
| Power source used | AC 90 ~ 240V, 50/60Hz 12VA |
| Sizes | 98 × 98 × 141mm |
| Panel cutting size | 92.5 × 92.5mm |
| weight | Appr. 700 g |
Dimensions
DN-130L
Feature
Function
– OP-01 : BCD parallel out (chnnel 1)
– OP-02 : RS232C serial interface (Standard)
– OP-03 : RS485 Multi drop interface
– OP-10 : Power DC24V 0.3A
– OP-14 : Input 5mV/V
– OP-15 : Input 10mV/V
SPECIFICATIONS
| Specifications | Accuracy |
|---|---|
| Application sensor | Strain gauge sensor |
| Sensor authorized voltage | DC 5V |
| Zero adjustment range | 100%FㆍS (Auto Zero) |
| Input signal | 0.5 ~ 3mV/ |
| Display | -19999 ~ +99999 |
| Character height | 7 Segment LED 14mm |
| A/D converter | 24 bit 100 sps/channel |
| D/A converter | 16 bit 100 Hz/channel |
| Zero variation | within 0.5㎶/℃ |
| Sensitivity variation | within 0.01%/℃ |
| Voltage output | 0 ~ ±10V or 4~20mA (Selective use) |
| Cintact capacity | AC 250V/DC 30V 3A |
| Relay life time | More than 10,000,000 times |
| Isage temperature range | -10℃ ~ 50℃ |
| Humidity | Less than 80% RH (No dew condensation) |
| Power source used | AC 85 ~ 265V 50/60Hz |
| Dimensions | 98 X 98 X 141mm |
| Cutting size | 92.5 X 92.5mm |
| Weight | About 700g |
DN-300
Show totals separately with 2ch indicator.
Left and right values and totals are displayed separately
Analog and contact outputs for each channel and sum individually.
Calibration method by actual load and calibration with rated output of sensor.
Watch dog
Display part and analogue zero by auto zero (DAC)
Analog out(DAC)
Relay output : Hi, Low, NG, OK.
Suitable for use with model RTB15
Option
OP-02 : RS232C serial interface (Standard installed)
OP-03 : RS485 Multi drop interface
| Spec. model | DN-300 | |
| SIGNAL | 1 ~ 3mV/V | |
| ANALOG OUT | DC 0 ~ ±10V, (4 ~ 20mA option) | |
| EXCITATION | 5V | |
| Available Sensors | Strain gauge type sensor (bridge 120W, 350W, 700W) | |
| Max. Indication | -19999 ~ +99999 | |
| A/D Converter | 24bit 1000 times/sec | |
| D/A Converter | 16 bit | |
| Temp. | ZERO | 0.5μV/℃ |
| SPAN | 0.01%/℃ | |
| Indicator | 7 segment LED 14mm / 10mm | |
| Status LED | Red LED 6 EA | |
| Key switch | 4EA | |
| Communication | RS232C (A + B) | |
| Comparison Output | Hi, Lo | |
| Contact Capacity | AC 250V 5A | |
| Temperature | -10℃~ 60, 80% RH or less (no condensation) | |
| Weight | About 600g | |
| Power supply | AC 90 ~ 240V, 50/60㎐ | |
| Outer Diameter | 97 × 97 × 141 mm (W × H × D) | |
| Panel Cutting Size | 92.5 × 92.5 mm | |
Dimensions
MI4000
Model MI4000 can be applied sensor(4ea) based on Input 4ch, output 4ch. One touch Auto zero.
External data Auto zero function.
External data hold function.
External data peak hold function.
External sample hold function.
External full proof average function.
External peak to peak function.
External program lock function.
Application sensor
Torque transducer, Load cell, Pressure Transducer, Potentiometer, encoder, RPM sensor, L.V.D.T etc.
Option
Analogue Auto zero.
Analogue Scale zero.
| SPECIFICATIONS | |
| Temperature storage | -10℃ ~ 85℃ |
| Temperature operating | 0 ~ 60℃ |
| Relat output | AC 125V 0.5A, DC 24V 1A |
| Transducer excitation | 5, 10, 15, 24VDC, ±15VDC |
| Type of inputs accepted | 0.5 ~ 3.5mV/V |
| Transducer current drive | 120mA |
| Calibration method | Front panel switches |
| Frequency response | 5KHz |
| Full scale output | 0~5V, 10V |
| Low pass filter | 10Hz, 100Hz, 1KHz |
| Temperature drift | 0.02% FS/˚C |
| A/D conversion | 16Bit |
| Sampling speed | 500times/sec |
| Characters displayed | 5 digits |
| Typical accuracy | ±0.02% |
| Polarity indicator | Yes |
| Decimal point selection | Push button setup |
| Display size | 14mm & 10mm |
| Resolution maximum | 99999 |
| Type | 5X7 DOT 20Digit 4Line |
| Input/output connector | Push button |
| Weight | 1000g |
| Mounting | Panel mounting |
| Size | 96mm × 96mm × 166mm |
| Power requirements | 220V : 50/60Hz(Option 110VAC, DC24V) |
Pocket indicator PDN10
SPECIFICATIONS
| Specifications | Accuracy |
|---|---|
| Power Source | DC 9V battery |
| Electric current Consumption | 15mA |
| LOAD CELL input range | 1.0mV/V ~ 3.0mV/V, Potenticmeter : 100~10KΩ |
| Display | 4 1/2 Digit LCD |
| Characters displayed | +19999 |
| Display Speed | Approx. 10 times/sec |
| Decunak point Position | 0, 0.0, 0.00, 0.000 |
| A/D Sampling speed | 100 times/sec |
| A/D Resolution | 16 bit |
| Zero Adjust Range | 100% F.S(AUTO ZERO) |
| Data stonage | 500 data can be memorised |
| Data output | RS232C Serial Interface |
DIMENSIONS
DN500N
SPECIFICATIONS
| Specifications | Accuracy |
|---|---|
| Load cell excitation | 10VDC±5%, 320mA |
| Input Signal | 0.5 ~ 3.0mV/V |
| A/D converting speed | 200times/sec |
| A/D converter resolution | 1/520,000 counts(19bits), Δ∑ |
| Non-linearity | 0.01% of full scale |
| Zero adjustment range | -0.6mV~42mV |
| Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm |
| Annunciator | steady, zero, tare, gross, auto, print, hold,Interface |
| Decimal point position | 0, 0.0, 0.00, 0.000 |
| Keyboard | Number key and function key 16 PCS. |
| Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ |
| Non-linearity | 0.01% of full scale |
| Rear panel | Loadcell input : 5pin connector External control : 12pin input terminal (zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C) |
| Power | SMPS Free Voltage (85V~265V) |
Option
DIMENSIONS
