รายละเอียดสินค้า
JAP100 Pneumatic Diaphragm Chuck
- Center through hole design,allow to set air blow or stopper in axis way
- Highly-sealed chuck body,helps protect cutting chips,dust or coolant fluid from entering
- Air cylinder intergrated,no rotary cylinder and draw bar required
- Gentle and Precise clamping,best for fragile and thin-wall work piece
- Repeatability within 5 um
- Front-mount design make installation easy
- O.D / I.D clamping applies by only switch the jaw pad
- Please use 5um filter in F.R.L units
Applications
- Spindle Grinding of DC Micro Motors
- Precise Bush
- Lens of Electronic Equipment
- Lens Frame of Smartphone
- Precision Sleeve
- Ceramics Grinding
- Cardiovascular stent
- Laser Carving, Laser Cutting, Laser W ielding
- Case of Stylus
| JAP-104 | JAP-105 | JAP-106 | |
|---|---|---|---|
| A | 100(3.94″) | 138(5.43″) | 164.5(6.48″) |
| B | 65(2.56″) | 80(3.15″) | 100(3.94″) |
| C | 4.5(0.18″) | 4(0.16″) | 6(0.24″) |
| D | M21xP1.5 | M35xP1.5 | M60xP1.5 |
| E | 70(2.76″) | 100(3.94″) | 130(5.12″) |
| F(P.C.D.) | 82(3.23″) | 115(4.53″) | 147(5.79″) |
| G | 97(3.82″) | 135(5.31″) | 167(6.57″) |
| H | 73(2.87″) | 89.5(3.52″) | 108(4.25″) |
| Mounting Bolts | 4H-M6 ( front ) | 3H-M8 ( front )+ 3H-M8 ( rear ) | 3H-M10 ( front )+ 3H-M10 ( rear ) |
| Max. RPM | 4000 | 3400 | 2400 |
| Air Pressure | 0.5-7 kg/cm² ( 7-100psi ) | 0.5-7 kg/cm² ( 7-100psi ) | 0.5-7 kg/cm² ( 7-100psi ) |
| Jaw Opening | 0.2(0.008″) | 0.2(0.008″) | 0.2(0.008″) |
| Through Hole | 10(0.39″) | 20.5(0.81″) | 42(1.65″) |
| Net Weight | 2.6 kgs ( 5.7 lbs ) | 6 kgs ( 13.2 lbs ) | 10.5 kgs ( 23.1 lbs ) |
