Envelope-open Facebook-f Line
ติดต่อเรา

สินค้า HALS LUBE PUMP

Screenshot 2026 06 11 135145

เบอร์โทรศัพท์
081-389-4990
Line ID
mechatronics09
ขอใบเสนอราคา
HMGP 303 & 303D
HMGP 303S & 303M
HGP 205S
HMGP 205C
HMGP 6N & 6C
HMGP 105N series
HMGP 105D series

HALS 33

HMGP 6A & 6MA

HV series

340 series

350 series

HMLV series

MIXING VALV

Valve series

HMGP 303 & 303D

Internal Control Fixed Quantity Oil Supply Pump

Model

Feature

  • A gear type volume pump that allows precise delivery across a wide range of viscosities.
  • It can be applied to long distances of more than 20m, and can also be used in small, large machine tools and high-precision machines.
  • To make full use of the fixed quantity oil supply system, the HMV series needs to be used for the valve.
  • It has an internal control, and therefore does not require separate control devices.
  • It has a built-in ullage decrease detector. (Float switch)

PUMP SPEC

PUMP SPEC
MODEL NAME HMGP-303 HMGP-303D
PUMP TYPE GEAR PUMP
DISCHARGE PRESSURE 17kg/cm²
PRESSURE GAUGE 0~35kg/cm²
USING OIL 32~220(cSt)
FILTER 80 Mesh
TANK CAPACITY 4Liter 2Liter
DISCHARGE AMOUNT 150cc/min
INTERVAL TIME 3~120min 3~30 / 30~120min
FLOAT S/W Contact type A contact (NO)
ON at Low level
PRESSURE S/W N/A
OIL SUPPLY CONTROL DEVICE Internal control
MOTOR SPEC
INPUT 80W
PHASE 1Ø
VOLTAGE 110V   |   200V   |   220V
CURRENT 1.8A/1.24A   |   1.0A   |   1.35A/0.85A
FREQUENCY 50/60Hz
PACKING SPEC
PACKING SIZE(cm) 36(W) x 17.5(L) x 30.5(D) 15(W) x 18(L) x 26(D)
WEIGHT(kg) PUMP 4 3
PACKING 4.5 3.5

Components

 

External Figure

 

Operating Guide

  • The pump operates once power is connected and electricity is supplied. You can set the pause time using the Interval ① on the front of the pump, and discharge ② to set the operating time (seconds). Afterwards, the pump will repeatedly operate and pause
  • Minimum pause time of the pump is 3 minutes, and the minimum discharge time can be set to 3 seconds.
  • When operating the pump, the DIS, lamp ③ switches on, and during the pause, the INT lamp ④ switches on. When ullage inside the tank decreases, the EMG, lamp ⑤ switches on. When ullage inside the tank decreases, the EMG lamp ⑤ switches on.
  • The MAN. button ⑥ can be used for test operations and to let air out from the pipes
    (But, do not operate more than 5 minutes, as it can cause Motor damage)
  • The pump is set at 17kg/cm when released from the factory, but this may differ depending on the changes in the viscosities of the oils used (oil viscosity, surrounding temperature).

Hydraulic circuit drawing

Wiring Diagram

HMGP 303S & 303M

External Control Fixed Quantity Oil Supply Pump

Model

Feature

  • A highly reliable externally controlled fixed quantity oil supply pump.
  • It is used across a wide range of fields, and is especially suitable as a fixed quantity oil supply pump for high-precision, large machine tools.
  • The pump’s main drive connection parts are made of single die casting pieces to ensure excellent durability.
  • An external control type that allows free pump control.
  • It has a built-in ullage decrease detector and a pressure decrease detector.

PUMP SPEC

PUMP SPEC
MODEL NAME HMGP-303S HMGP-303M
PUMP TYPE GEAR PUMP
DISCHARGE PRESSURE 17kg/cm²
PRESSURE GAUGE 0~35kg/cm²
USING OIL 32~220(cSt)
FILTER 80 Mesh
TANK CAPACITY 4Liter 2Liter
DISCHARGE AMOUNT 150cc/min
FLOAT S/W Contact type A contact (NO)
Operation pressure : 12 ± 1 bar ON
OIL SUPPLY CONTROL DEVICE External control
MOTOR SPEC
INPUT 80W
PHASE 1Ø
VOLTAGE 110V   |   200V   |   220V
CURRENT 1.8A/1.24A   |   1.0A   |   1.35A/0.85A
FREQUENCY 50/60Hz
PACKING SPEC
PACKING SIZE(cm) 36(W) x 18(L) x 31(D) 23(W) x 14(L) x 28(D)
WEIGHT(kg) PUMP 4 3.5
PACKING 4.5 4

HMGP 205S

External Control Fixed Quantity Oil Supply Pump

Model

Feature

  • A large capacity fixed quantity oil supply pump suitable for multiple oil supply sites and large machines
  • An external control type that allows various pump controls according to operational environments.
  • Main drive parts of the pump are inside the AL body to ensure superior durability.
  • The pump part can be used separately, and can be attached to other tanks for use.

PUMP SPEC

PUMP SPEC
MODEL NAME HMGP-205S
PUMP TYPE GEAR PUMP
DISCHARGE PRESSURE 15~30kg/cm²
PRESSURE GAUGE 0~35kg/cm²
USING OIL 32~220(cSt)
FILTER 80 Mesh
TANK CAPACITY 5Liter
DISCHARGE AMOUNT 300cc/min
FLOAT S/W Contact type A contact (NO)
Operation pressure : 12 ± 1 bar ON
OIL SUPPLY CONTROL DEVICE External control
MOTOR SPEC
INPUT 60W
PHASE 1Ø
VOLTAGE 200V   |   220V
CURRENT 1.0A   |   1.35A/0.85A
FREQUENCY 50/60Hz
PACKING SPEC
PACKING SIZE(cm) 35(W) x 18(L) x 30(D)
WEIGHT(kg) PUMP 5
PACKING 5.5

HMGP 205C

External Control Continuous Oil Supply Pump

Model

Feature

  • It can be applied to large capacity proportional oil supply systems
  • It is suitable for lubricating oil supply devices, as well as for a small number of lubricating oil recovery devices.
  • An externally controlled pump, and is capable of various applications according to the users’ operational environments.
  • It is equipped with an ullage decrease detector.
  • Applied applied broadly from HJB series to HJC series.(Continuous type)

PUMP SPEC

PUMP SPEC
MODEL NAME HMGP-205C
PUMP TYPE GEAR PUMP
DISCHARGE PRESSURE 5~10kg/cm²
PRESSURE GAUGE 0~35kg/cm²
USING OIL 32~220(cSt)
FILTER 80 Mesh
TANK CAPACITY 5Liter
DISCHARGE AMOUNT 100cc/min
INTERVAL TIME CONSTANT
FLOAT S/W Contact type A contact (NO)
ON at Low level
OIL SUPPLY CONTROL DEVICE External control
OIL WARNING Output at Contact point
MOTOR SPEC
INPUT 25W
PHASE 1Ø
VOLTAGE 110V   |   220V
CURRENT 0.46A   |   0.21A
FREQUENCY 50/60Hz
PACKING SPEC
PACKING SIZE(cm) 35(W) x 18(L) x 30(D)
WEIGHT(kg) PUMP 7
PACKING 8

HMGP 6N & 6C

Internal Control or External Control Proportional Oil Supply Pump

Model

Feature

  • It is the most suitable pump for proportional oil supply, and can be applied to a wide range of industrial fields
  • It has a simple structure and excellent durability
  • Internal control (6N) or External control (6C) are available.
  • It is equipped with a ullage decrease detector tovincrease reliability.
  • It is equipped with a dustproof device, and can be used in presses that are subjected to vibrations and impacts.
  • A line filter and a drain filter are used side by side, allowing oil reuse.
  • To fully utilize the proportional oil supply system, you must use the HJB series valve.

PUMP SPEC

PUMP SPEC
MODEL NAME HMGP-6N HMGP-6C
PUMP TYPE GEAR PUMP
DISCHARGE PRESSURE 16kg/cm²
PRESSURE GAUGE 0~35kg/cm²
USING OIL 32~220(cSt)
FILTER 80 Mesh
TANK CAPACITY 4Liter
DISCHARGE AMOUNT 4~113cc 100cc/min
INTERVAL TIME 1~120min / 1~60min / 2~32Hr External control
FLOAT S/W Contact type A contact (NO)
ON at Low level
OIL RECOVERY Attachable
OIL WARNING BUZZER/LAMP
MOTOR SPEC
INPUT 50W
PHASE 1Ø
VOLTAGE 110V   |   200V   |   220V
CURRENT 1.40A/0.95A   |   0.60A   |   0.75A/0.50A
FREQUENCY 50/60Hz
PACKING SPEC
PACKING SIZE(cm) 35(W) x 15(L) x 30(D)
WEIGHT(kg) PUMP 5
PACKING 6

HMGP 105N series

Internal & External Control Proportional Oil Supply Pump

Model

Feature

  • It is the most suitable pump for proportional oil supply. It can be applied to a wide range of industrial machines.
  • The compact design reduces installation space limitations, and the simple use means easy installation and repairs
  • During reduced ulage, selections can be made to suit user environments using contact output and buzzer.
  • Every model is attached with a suction filter to prevent the entry of alien substances in the pipe.
  • Increased pressure settings are available according to operational environments.
  • Internal control type(HMGP-105N, 105M, 103) and External control type(HMGP-105C) can be used.

PUMP SPEC

PUMP SPEC
MODEL NAME HMGP-105N HMGP-105M HMGP-103 HMGP-105C
PUMP TYPE GEAR PUMP
DISCHARGE PRESSURE 8kg/cm²
USING OIL 32~220(cSt)
FILTER 80 Mesh
TANK CAPACITY 2Liter
DISCHARGE AMOUNT S : 4~45cc/min / L : 4~80cc/min 100cc/min
INTERVAL TIME S : 3~30min / L : 30~120min External control
FLOAT S/W – Contact type A contact (NO)
– ON at Low level
OIL WARNING Order specification BUZZER Optput at Contact point
MOTOR SPEC
INPUT 50W
PHASE 1Ø
VOLTAGE 110V   |   200V   |   220V
CURRENT 1.40A/0.95A   |   0.60A   |   0.75A/0.5A
FREQUENCY 50/60Hz
PACKING SPEC
PACKING SIZE(cm) 15(W) x 18(L) x 26(D)
WEIGHT(kg) PUMP 2.4
PACKING 2.5

HMGP 105D series

Internal & External Control Proportional Oil Supply Pump

Model

Feature

  • A product identical in shape to HMGP-105, but with the control box made out of die casting AL to ensure superior durability and resistance against external impacts.
  • The main parts of the pump are integrated to ensure easy repairs and maintenance.
  • Internal control type(HMGP-105D) and External control type(HMGP-105DC, 105W) can be used.

PUMP SPEC

PUMP SPEC
MODEL NAME HMGP-105D HMGP-105DC HMGP-105W
PUMP TYPE GEAR PUMP
DISCHARGE PRESSURE 8kg/cm²
USING OIL 32~220(cSt)
FILTER 80 Mesh
TANK CAPACITY 2Liter
DISCHARGE AMOUNT 4~45 / 4~80cc/min 100cc/min
INTERVAL TIME 3~30 / 300~120min External control
FLOAT S/W Contact type A contact (NO)
ON at Low level
PRESSURE S/W – Contact type A contact(NO)
– Operation pressure 1.5 ± 0.2 bar ON
MOTOR SPEC
INPUT 50W
PHASE 1Ø
VOLTAGE 110V   |   200V   |   220V
CURRENT 1.40A/0.95A   |   0.60A   |   0.75A/0.50A
FREQUENCY 50/60Hz
PACKING SPEC
PACKING SIZE(cm) 15(W) x 18(L) x 26(D)
WEIGHT(kg) PUMP 2.9
PACKING 2.3

HALS 33

Piston Manual Pump

Model

Feature

A piston manual pump with a specially processed cylinder interior to raise the pump discharge pressure to 7kg/cm2 for a smooth supply of lubricating oil. Also compact and lightweight, requiring little installation space, and is therefore very economical.

PUMP SPEC

PUMP SPEC
MODEL NAME HALS-33
PUMP TYPE PISTON
DISCHARGE PRESSURE 7kg/cm²
TANK CAPACITY 1Liter
DISCHARGE AMOUNT 7cc/st
PACKING SPEC
PACKING SIZE(cm) 25(W) x 18(L) x 23(D)
WEIGHT(kg) PUMP 1
PACKING 2

HMGP 6A & 6MA

Air Drive Fixed Quantity / Proportional Oil Supply Pump

Model

Feature

  • HMGP-6A
    – Easy lubricating oil supply through supplying compressed air
    – The pump drive parts are produced with die casting molds for superior durability
    – Easy control bar operation for free control of the quantity of discharge
    – The attached suction filter on every model prevents suction of foreign substances
  • HMGP-6MA
    – A fixed quantity oil supply pump used with the HMV Series fixed quantity valve
    – It is capable of long distance delivery.

PUMP SPEC

PUMP SPEC
MODEL NAME HMGP-6A HMGP-6MA
DISCHARGE PRESSURE 10kg/cm² 20kg/cm²
USING OIL 32~220(cSt)
FILTER 80 Mesh
TANK CAPACITY 2Liter
DISCHARGE AMOUNT 0~6cc/st 6cc/st
PACKING SPEC
PACKING SIZE(cm) 15(W) x 18(L) x 26(D)
WEIGHT(kg) PUMP 1
PACKING 2

 

สินค้าที่คล้ายกัน

Typ Ck

Series C

แกนจับชิ้นงานขึ้นรูปด้วยการตีขึ้นรูป ทำจากเหล็กกล้าชุบแข็ง จุดหมุนทำจากเหล็กอัลลอยด์ชุบแข็งทั้งชิ้น รองรับแรงกดตามแนวแกนและแนวรัศมีสูงด้วยระบบสี่จุด ความแม่นยำในการจัดศูนย์กลาง 0.005 มม. หรือดีกว่า ความเร็วสูงถึง 10,000
เลือกรูปแบบสินค้า
Pic2 Hob

HOBS (dry/wet cutting)

6ab9b76861d04aeb278ea0d80bc64d38

Future Life Technology

Future Life Technology Co., Ltd. was founded in 1997. With
เลือกรูปแบบสินค้า
Screenshot 2026 05 21 160539

TOSOKU JAPAN

  • Rotary Switch
  • Code Switch
  • Rotary Encoder
  • Manual Pulse Generator
เลือกรูปแบบสินค้า

PRODUCT INFORMATION

Buyer information